Specification for Lamp Body

  Dimmensions:
      Height including plug         145mm
      Height not including plug    102mm
      Height of Lamp body           90mm
      Width                                     38mm
      Depth                                    38mm
      Weight                                295gm

   Electrical:
      This device must be powered by a CONSTANT  CURRENT
      source.

      Voltage                               3 to 4 volts
      Current                               800mA MAX

  Connector:
      Type                                   Bulgin 400 series 4 pin
                                                 Male on Lamp Body
                                                 Female PX0410/04S required for connection (SA3347 pins) 
      Rating                                IP68

  Pinout
        Pin 1                               Red Negative
        Pin 2                               Red Positive
        Pin 3                               Green Negative
        Pin 4                               Green Positive

   Light Output:
      Green
         Intensity                         160 cd @ 350mA
                                               290 cd @ 700mA
         Bean Angle                     35° (1/2 beam)

     Red
         Intensity                           80 cd @ 350mA
                                               170 cd @ 700mA
         Bean Angle                    35° (1/2 beam)

   Ambient Temperature:   –10°C to 50°C

   IP Rating of Lamp Body:  IP68

Specification for Constant Current LED Driver

  Electrical:
      Input                                12 to 26 Volts DC
      Brown                               Positive
      Blue                                  Negative
      Efficiency                        > 80%
      Output                             800mA
                                              Can be set to other values in factory
      Reverse Polarity            Yes
      protection 

Mounting Holes:

        Dimensions of rear mounting holes in mm

       Holes M4 thread
      10mm deep